HJ Дигитален серво тестер/ESC Съвместимост


Входно напрежение:5-6V
Изходен сигнал:800-2200us
Can be synchronized output control 4 servos and used to
compare the performance steering gear
control of the steering servo output signal can be accurate
to 2us (1 milliseconds = 1000 microseconds), you can test
the steering gear is able to respond to subtle changes.
with PPM signal test function in the display the input PPM
signal changes while the input the PPM signal synchronization
output to the servo.

Energized automatically enter manual mode (Manual) 20us
50H analog servo signal cycle, frequency 50HZ, rotary
potentiometers to decrease or increase the width of the
output pulse.
Button the Select patterns>
1.S-1 manual mode (Manual)
2.S-2-bit mode (Neutral)
3. S-3 automatic mode (Automatic)
Keys pulse width patterns
1. 50H analog servo signal cycle 20us frequency 50HZ
2. 125H digital the steering gear a signal cycle 8us frequency 125HZ
3. 250H Digital Servo signal cycle 4us frequency 250HZ
digital or analog signal button to select the corresponding servos and then plug in the steering servo,
to avoid damage to the steering servo

Този продукт беше добавен в нашия каталог на 19 април петък, 2013.

Вашият IP адрес е:
Copyright © 2019 HobbyRC-BG Магазин. Powered by Hobbyrc-BG.com.
Valid XHTML 1.0 Transitional BGtop       Check PageRank